PA2200

Key features:

PA2200

Plasma Cloud’s response to high performance requirements. This tri-band (1x 2.4GHz & 2x 5GHz) 802.11ac WiFi AccessPoint offers maximum throughput by leveraging the full WiFi spectrum concurrently. The PA2200 shines best in high density and high throughput demand scenarios.

Power over Ethernet (PoE)

Power over Ethernet (PoE) allows to supply a device with power and data over a single Ethernet cable connection. This reduces installation cost and effort for locations without available power lines. Furthermore, when connected to a Plasma Cloud PoE switch, PoE allows to centrally manage & monitor the power supply.

Ethernet Ports

The 2 provided Ethernet ports allow for maximum flexibility: one port can be used as wired uplink while the other port serves as LAN access for other wired devices. Each Ethernet port comes with a smart uplink detection to automatically determining whether a port should be uplink or provide LAN access.

Mounting Options

Regardless where to place the Access Points – on a wall, ceiling grid, pole, outdoors – the installer kit included with every Access Point facilitates the installation. Easily pluggable mounting options got you covered for every scenario.

Technical Info

FeatureSpecifications
Radio Chains / Streams2.4 GHz : 2x2
5 GHz : 2x2 + 2x2
Antennas2.4 GHz : 5.0 dBi
5 GHz : 5.0 dBi
Data Rates 300 Mbps + 867 Mbps + 867 Mbps
2.4 GHz 2 stream, 802.11 b/g/n (max rate: 300 Mbps)
5 GHz 2 stream, 802.11 a/b/g/n/ac (max rate: 867 Mbps) Wave 2, MU-MIMO
+
2 stream, 802.11 a/b/g/n/ac (max rate: 867 Mbps) Wave 2, MU-MIMO
ProcessorQualcomm Honeybee QCA9531
Memory64 MB
Physical Interface 2 x 100 Mbps Ethernet ports
PoE 24V passive PoE /
802.3af / 802.3at
DC Jack 12-24V / 1A
Power Consumption Min : 3W
Max : 9W
Max Recommended Clients 50 per AP
Indoor/Outdoor Rating CE marked for indoor/outdoor use, IP55
Dimension (W x D x H) 142 x 142 x 34 mm
Weight470 g
Operating Temperature0°C ~ 40°C (32°F ~ 104°F)
CertificationsCE, FCC, IC, RCM