PA300E
Key features:
- 2.4 GHz 802.11n WiFi
- Two external antennas
- Zero config, plug-and-play networking
- Free cloud-based web console for complete management
- Water and dust resistant with an IP55 rating
- Universal installation kit included
PA300E
Plasma Cloud’s low cost solution providing single band dual stream 2.4GHz 802.11n WiFi in a weather resistant housing. Your best choice if the budget is a concern or for large WiFi sensor deployments with custom antennas.
Power over Ethernet (PoE)
Power over Ethernet (PoE) allows to supply a device with power and data over a single Ethernet cable connection. This reduces installation cost and effort for locations without available power lines. Furthermore, when connected to a Plasma Cloud PoE switch, PoE allows to centrally manage & monitor the power supply.
Ethernet Ports
The 2 provided Ethernet ports allow for maximum flexibility: one port can be used as wired uplink while the other port serves as LAN access for other wired devices. Each Ethernet port comes with a smart uplink detection to automatically determining whether a port should be uplink or provide LAN access.
Mounting Options
Regardless where to place the Access Points – on a wall, ceiling grid, pole, outdoors – the installer kit included with every Access Point facilitates the installation. Easily pluggable mounting options got you covered for every scenario.
Technical Info
Feature | Specifications |
---|---|
Radio Chains / Streams | 2.4 GHz : 2x2 |
Data Rates | 300 Mbps |
2.4 GHz | 2 stream, 802.11 b/g/n (max rate: 300 Mbps) |
Processor | Qualcomm Honeybee QCA9531 |
Memory | 64 MB |
Physical Interface | 2 x 100 Mbps Ethernet ports |
PoE | 24V passive PoE / 802.3af / 802.3at |
DC Jack | 12-24V / 1A |
Power Consumption | Min : 3W Max : 9W |
Max Recommended Clients | 50 per AP |
Indoor/Outdoor Rating | CE marked for indoor/outdoor use, IP55 |
Dimension (W x D x H) | 142 x 142 x 34 mm |
Weight | 470 g |
Operating Temperature | 0°C ~ 40°C (32°F ~ 104°F) |
Certifications | CE, FCC, IC, RCM |